July 2022
This file contains installation instructions and compatibility information for LabVIEW.
You can find more release information on ni.com.
Refer to the labview/readme directory for readme files about LabVIEW add-ons, such as modules and toolkits.
Product Security and Critical Updates
Supported Modules and Toolkits
LabVIEW 2022 Q3 for Linux has the following requirements:
| Linux | Run-Time Engine | Development Environment |
|---|---|---|
| Processor | Pentium 4 G1 (or equivalent) or later | Pentium 4 G1 (or equivalent) or later |
| RAM | 256 MB | 1 GB |
| Screen Resolution | 1024 x 768 pixels | 1024 x 768 pixels |
| Operating System | Linux kernel 2.6x or 3.x GNU C Library (glibc) Version 2.11 or later for the Intel x86_64 architecture | openSUSE Leap 15.4 openSUSE Leap 15.3 openSUSE Leap 15.2 openSUSE Leap 15.1 Red Hat Enterprise Linux 9 Red Hat Enterprise Linux 8 Red Hat Enterprise Linux 7 CentOS 8 CentOS 7 Ubuntu 22.04 LTS Ubuntu 20.04 LTS Ubuntu 18.04 LTS |
| Disk Space | 98 MB | 1.1 GB for the complete installation |
| Color Palette | N/A | LabVIEW and the LabVIEW Help contain 16-bit color graphics. LabVIEW requires a minimum color palette setting of 16-bit color. |
| Temporary Files Directory | N/A | LabVIEW uses a directory for storing temporary files. NI recommends that you have several megabytes of disk space available for this temporary directory. |
| Adobe Reader | N/A | You must have Adobe Reader installed to search PDF versions of all LabVIEW manuals. |
Note
| ||
Complete the following steps to install and activate LabVIEW for Linux.
Insert and mount the LabVIEW installation media. As the root user in the mounted directory, enter sh ./INSTALL to install LabVIEW in the /usr/local directory.
To install LabVIEW modules and toolkits, refer to the readme of each product for installation instructions.
You can install NI device drivers from ni.com/linuxdrivers.
Refer to Upgrading LabVIEW for information about protecting existing VIs and projects before installing a new version of LabVIEW, as well as upgrade and compatibility issues and a complete list of new features in LabVIEW 2022 Q3.
Note If you purchased this product with an NI Software Suite or NI Product Bundle, use the installation media that shipped with your purchase to install this product.
Visit ni.com/security for security information about NI products. Visit ni.com/r/critical-updates for information about critical updates from NI.
LabVIEW 2022 Q3 for Linux supports the following modules and toolkits.
1 The Control Design and Simulation Module does not support the System Identification VIs, System Identification Assistant, and Control Design Assistant.
2 The MathScript Module does not support the libraries class of MathScript Module functions.
3 The VI Analyzer Toolkit and Application Builder are only available with the LabVIEW Professional Development System.
Refer to the readme of each product for more information about system requirements, installation instructions, and activation.
Refer to the NI website for information about drivers compatible with LabVIEW for Linux. To use hardware with LabVIEW 2022 Q3, install the latest version of the driver for the device. Refer to the readme of each driver for more information about system requirements and installation instructions.
Refer to the LabVIEW Help, accessible by selecting Help»LabVIEW Help from LabVIEW, for information about LabVIEW 2022 Q3.
Copyright
© 2004–2022 National Instruments Corporation. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
End-User License Agreements and Third-Party Legal Notices
For end-user license agreements (EULAs) and copyright notices, conditions, and disclaimers, including information regarding certain third-party components used in LabVIEW, refer to the Copyright topic of the LabVIEW Help.
U.S. Government Restricted Rights
If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.
IVI Foundation Copyright Notice
Content from the IVI specifications reproduced with permission from the IVI Foundation.
The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Trademarks
Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
Patents
For patents covering the NI products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the NI Patent Notice at ni.com/patents.