October 2022
This file contains installation instructions and compatibility information for Automotive Diagnostic Command Set Toolkit 2022 Q4.
You can find more release information on ni.com.
The Automotive Diagnostic Command Set Toolkit helps you design and implement automotive diagnostic applications for ECU production test.
Automotive Diagnostic Command Set Toolkit 2022 Q4 software for Linux has been tested on the following distributions:
Automotive Diagnostic Command Set Toolkit requires a 64-bit distribution and does not support 32-bit applications.
NI provides a repository add-on for all supported drivers that you can install using your Linux distribution's native package manager.
After the driver package(s) are installed, you must rebuild the new packages for the system kernel. NI recommends that you run the command 'dkms autoinstall' after installation, and before rebooting the system, to install the latest revision of all modules that have been installed for other kernel revisions. After doing so, the installed device drivers will function immediately on the next system start.
The "Automotive Diagnostic Command Set Toolkit Support for LabVIEW" package supports applications using Automotive Diagnostic Command Set Toolkit with LabVIEW 2022 or later. When installing Automotive Diagnostic Command Set Toolkit, this package will be recommended if you have already installed LabVIEW 2022 or later and installs to the LVAddons directory.
LVAddons directory location: /usr/local/natinst/share/lvaddons
The Automotive Diagnostic Command Set Toolkit 2022 Q4 software for Linux release adds the following features:
The following list details the hardware models supported in Automotive Diagnostic Command Set Toolkit 2022 Q4 for Linux.
Use a web browser to view the Automotive Diagnostic Command Set Toolkit 2022 Q4 documentation at https://www.ni.com/r/adcshelp. You can also find a copy of the ADCS Toolkit Help installed at /usr/share/doc/ni-adcs.
This release includes examples showing the use of Automotive Diagnostic Command Set Toolkit 2022 Q4 in C and LabVIEW.
C examples are located in /usr/share/doc/ni-adcs/examples. Make files are provided that link to the necessary libraries.
The LabVIEW examples are located in the LabVIEW examples directory.
Some features discussed in the Automotive Diagnostic Command Set Toolkit 2022 Q4 documentation are unavailable on Linux.
Copyright
© 2009–2022 National Instruments Corporation. All rights reserved.
This publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
Notices are located in the /usr/share/doc/ni-adcs/NOTICES directory. EULAs are located in the /usr/share/ni/licenses directory.
If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.
Content from the IVI specifications reproduced with permission from the IVI Foundation.
The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
For patents covering the NI products/technology, refer to the NI Patent Notice at ni.com/patents.