July 2021
This file contains installation instructions and compatibility information for the NI Wafer Level Reliability (WLR) Test Software 21.5.
You can find more release information on ni.com.
Additional Software Requirements
Product Security and Critical Updates
Automating the Installation of NI Products
Using NI Software with Microsoft Windows 10
The WLR Test Software is a software tool that allows you to measure the reliability of semiconductor wafers. The WLR Test Software 21.5 provides the following components for 2-terminal and 4-terminal stress tests and parametric sweeps, which are compliant with JEDEC standards such as Time Dependent Dielectric Breakdown (TDDB), Hot Carrier Injection (HCI), and Bias Temperature Instability (BTI).
The WLR Test Software supports Windows 10 (64-bit).
The WLR Test Software 21.5 requires the following software versions.
| Software | Version | Required by WLR Test Software Component(s) | Required License |
|---|---|---|---|
| LabVIEW | 2019 SP1 (64-bit only) | LabVIEW APIs and examples WLR Test Compensation Utility | LabVIEW Full or Professional Development System License |
| TestStand | 2020 (64-bit only) | WLR Test Soft Front Panel | TestStand Development System License |
| NI-DCPower | 20.7 | All components | — |
| Microsoft Visual Studio | 2017 or later (64-bit only) | C# APIs and examples | As required by Microsoft |
Refer to the readme or documentation of each software for additional system requirements and supported operating systems.
Refer to the WLR Test Software Note to Users for more information about installation. You can also contact your NI sales representative for more information.
Note Use the serial number that is included with your software to activate WLR Test Software. For more information on WLR Test Software activation, refer to NI Software Activation.
Visit ni.com/security to view and subscribe to receive security notifications about NI products. For information about critical updates from NI, refer to Available Critical and Security Updates for NI Software.
The WLR Test Software 21.5 supports the PXIe-4135 Source Measure Unit.
Refer to the WLR Test Software User Manual, accessible from Start»All Programs»National Instruments»WLR Test Documentation, for information about the WLR Test Software.
LabVIEW and C# examples for the WLR Test Software are accessible from Start»All Programs»National Instruments»WLR Test Examples. You can modify an example to fit an application, or you can copy and paste from one or more examples into an application that you create.
You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes.
If the NI product you are installing uses Microsoft .NET 4.6.2, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.6.2 separately before you install NI software.
For more information about automating the installation of NI products, refer to Automating an Installer in the NI Package Manager manual.
Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, refer to NI Product Compatibility for Microsoft Windows 10.
Copyright
© 2021 National Instruments Corporation. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
End-User License Agreements and Third-Party Legal Notices
You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
U.S. Government Restricted Rights
If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.
IVI Foundation Copyright Notice
Content from the IVI specifications reproduced with permission from the IVI Foundation.
The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Trademarks
Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
Patents
For patents covering the NI products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the NI Patent Notice at ni.com/patents.
378509B-01