October 2019
This file contains important information about the RFmx NR, including system requirements and installation instructions.
Product Security and Critical Updates
Automating the Installation of NI Products
Using NI Software with Microsoft Windows 10
Using NI Software with Microsoft Windows 8.1
RFmx NR Drops Support for Windows 7 (64-Bit) and Windows Server 2008 R2 in 2021
The RFmx NR personality is a highly optimized API for performing physical layer measurements on 5G New Radio (NR) signals. RFmx NR is completely interoperable with all RFmx APIs. It provides simple access to the most advanced optimization techniques such as multimeasurement parallelism and multi-DUT measurements. The result is extremely fast and high-quality measurements with minimal software development efforts.
RFmx NR 19.1 includes the following new features:
RFmx NR 19.0 includes the following new features:
RFmx NR 3.0 includes the following new features:
The following hardware products are supported in all operating systems listed in the Supported Operating Systems section.
Device-specific information about these modules is included in the NI RF Vector Signal Analyzers Help .
Device-specific information about these modules is included in the NI RF Vector Signal Transceivers Help .
* Depending on the amount of data acquired and/or processed, a larger amount of memory may be required.
RFmx NR 19.1 supports the following 64-bit operating systems:
1 NI software installs VC2015 Runtime and .NET 4.6.2. Windows 8.1 and Windows Server 2012 R2 require Microsoft updates to support these items. Refer to Microsoft KB2919442 and KB2919355 for more information about how to install these updates.
2 NI software is signed with a SHA-256 certificate. Windows 7 SP1 and Windows Server 2008 R2 SP1 require Microsoft updates to support SHA-256. Refer to Microsoft KB3033929 for more information about how to install this security update.
Note In 2019, RFmx NR dropped support for all 32-bit Windows operating systems. RFmx NR will not install or run on an unsupported OS. Refer to RFmx NR Drops Support for Windows 7 (64-Bit) and Windows Server 2008 R2 in 2021 for information about future OS support.
RFmx NR supports the following application software versions, including service packs. You should install application software, such as LabVIEW, LabWindows/CVI or Microsoft Visual Studio®, before installing RFmx NR. To add support for application software installed after installing RFmx NR modify your RFmx NR installation or launch the RFmx NR installer again. If you are not using NI application software, refer to Microsoft Visual Studio Support .
| Application Software | Versions Supported by RFmx NR |
|---|---|
| LabVIEW | 2016, 2017, 2018 SP1 f4 patch, or 2019 |
If you are using the RFmx NR .NET Class Library, .NET Framework 4.0 (minimum) is required. The RFmx NR .NET Class Library can be used with Visual C# or Visual Basic .NET in any Visual Studio version that can target .NET Framework 4.0.
NI installs RFmx NR using NI Package Manager. If you do not already have NI software installed, RFmx NR installs NI Package Manager to handle the installation of your NI software. Visit ni.com/info and enter the Info Code NIPMDownload to download NI Package Manager. Refer to the NI Package Manager Manual for more information about installing, removing, and upgrading NI software using NI Package Manager.
| Item | Installed Location |
|---|---|
| Version Compatibility Checker | <NIDir>\RFmx\niRFmxCompatibility_Checker.exe |
| Debug Configuration Utility | <NIDir>\RFmx\niRFmxDebugConfigurationUtility.exe |
| DLLs | <SYSDIR> |
| Header files | <NIDir> \Shared\ExternalCompilerSupport\C\include |
| Import Library files (64-bit) |
|
| .NET Class Libraries | |
| Assemblies | <MSTUDIOVS2010DIR> \DotNET\Assemblies\Current\NationalInstruments.RFmx.NRMX.Fx40.dll <MSTUDIOVS2010DIR> \DotNET\Assemblies\Current\NationalInstruments.RFmx.InstrMX.Fx40.dll <MSTUDIOVS2010DIR> \DotNET\Assemblies\Current\NationalInstruments.Common.dll |
Select Start » All Programs » National Instruments» RFmx NR» RFmx Soft Front Panel to launch the RFmx Soft Front Panel (64-bit).
RFmx NR palette VIs are available from the Functions » Measurement I/O » NI-RFmx » NR palette.
Documentation for RFmx NR is located at Start»All Programs»National Instruments»RFmx NR»RFmx NR Documentation . The documentation set is composed of the following documents.
| Document | Format | Description |
|---|---|---|
| RFmx NR Help | HTML/Windows Help | Contains primary help content for RFmx NR. This help file is an HTML version of a traditional user manual that includes the following information:
|
| RFmx NR 19.1 Readme | HTML (this document) | Contains information about supported hardware and operating systems, new features, fixed issues, and legal notices. |
You can access all the installed RFmx NR examples at Start»All Programs»National Instruments»RFmx NR»RFmx NR Examples.
For the most recent revisions of documentation and for newly released documentation, visit ni.com/manuals .
Visit ni.com/security to view and subscribe to receive security notifications about National Instruments products. Visit ni.com/critical-updates for information about critical updates from National Instruments.
The following are the behavior changes in RFmx NR 19.1 from RFmx NR 19.0.
The following are the behavior changes in RFmx NR 19.0 from RFmx NR 3.0.
You can access the software and documentation known issues list online. Refer to the NR Known Issues for an up-to-date list of known issues.
The following items are the IDs and titles of a subset of issues fixed in RFmx NR . This is not an exhaustive list of issues fixed in the current version of the RFmx NR . If you have a Bug ID, you can search this list to validate that the issue has been fixed.
The following bugs are fixed in RFmx NR 19.1 from RFmx NR 19.0.
| ID | Fixed Issue |
|---|---|
| 245206 | Fixed an issue in PDSCH demodulated bits when the signal contained SSB. |
| 245000 | Fixed an issue with IBW computation in the ACP measurement to be compliant with 3GPP TS 38.104 specification. |
| 249283 | Fixed an issue to report an error when the measurement bandwidth exceeds the instantaneous bandwidth on PXIe-5668 and PXIe-5665. |
| 234240 | Fixed an intermittent error occurring at Analyze IQ and Analyze Spectrum APIs when performing a composite measurement with different averaging count for each measurement. |
| 223248/214747/214717 | Improved accuracy of IQ Impairments measurements. |
| 217152/217136 | Fixed an issue with CHP and OBW measurements when the Acq BW Optimization Enabled property is set to True . |
The following bugs are fixed in RFmx NR 19.0 from RFmx NR 3.0.
| ID | Fixed Issue |
|---|---|
| 244818 | Fixed an issue where querying the ACP Results Subblock Center Freq property returned an incorrect value. |
| 244784 | Fixed an issue where the trace for demodulated bits is not correct for 16QAM, 64QAM and 256 QAM. |
| 244721 | Fixed an issue where RFmxNR DL EVM shows a positive value on selecting unit to dB. |
You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes.
If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.
For more information about automating the installation of NI products, refer to the following KnowledgeBase articles:
Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, visit ni.com/windows10 .
When you install NI software on Microsoft Windows 8.1, you will notice a few additional tiles in the Apps view, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (NI MAX), and NI Launcher. For more information about NI support for Windows 8.1, visit ni.com/windows8 .
RFmx NR will drop support for Windows 7 (64-bit) and Windows Server 2008 R2 starting in 2021. Versions of this product that ship after May 1, 2021, may not install or execute correctly on these operating systems. For detailed information about NI operating system support, visit ni.com/r/win32bitsupport .
For detailed information about NI application software product life cycles, visit ni.com/info and enter one of the following Info Codes:
| Product | Info Code |
|---|---|
| LabVIEW | lifecycle |
| LabWindows/CVI | cvi_lifecycle |
| Measurement Studio | mstudiolifecycle |
| TestStand | tslcp |
| DIAdem | ddlcp |
| SignalExpress | selcp |
| VeriStand | nivslifecycle |
Copyright
© 2018–2019 National Instruments. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
End-User License Agreements and Third-Party Legal Notices
You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
U.S. Government Restricted Rights
If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.
IVI Foundation Copyright Notice
Content from the IVI specifications reproduced with permission from the IVI Foundation.
The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Trademarks
Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
Patents
For patents covering the NI products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the NI Patent Notice at ni.com/patents .
377911C-01