This article outlines methods for troubleshooting and isolating the causes of measurement offset and noise in Multifunction I/O DAQ hardware.

When I set my trigger to be retriggerable and I run my VI I get the following error: Error -200077 occurred at Property Node DAQmx Trigger (arg 1) in DAQmx Start Trigger (Analog Edge).vi:2->Your VI Name.vi ...

While reading the specifications of my DAQ device, I found a terminology called Absolute Accuracy at Full Scale. What is the meaning of Absolute Accuracy at Full Scale and how can I calculate it?

Does my DAQ device support analog or digital triggering?

In the DAQ device specification sheet, there is about a type of ADC(Analog-to-Digital Converters). What types of ADC are used in NI DAQ Devices, such as Multifunction I/O DAQ, DSA or SC Express?

What is the difference between the sample clock (scan clock) and the convert clock (channel clock) on my multifunction data acquisition board?

The following devices support programmable power up states: 6509 651x (6512, 6513, 6514, 6515) 652x (6525, 6527, 6528), All M Series boards (62xx) All X Series boards (63xx) You can set power-up states ...

When using a DAQ device to acquire voltage data, the displayed voltage amplitude is lower than expected.

When trying to purchase some NI hardware from your Shop Page, I have seen products that include information about the Life Cycle Status. For instance, when trying to purchase a PXIe-8821 controller, I ...

This tutorial provides step–by-step instructions for setting up your USB R Series device, adding it to a project, and creating an analog input acquisition using a DMA FIFO. Requirements Software LabVIEW ...