Filtered Results
Clear All
Showing 1 - 10 of 10 results
Error -1074384864 Occurred When Running XNET Session in LabVIEW

When I try to run NI-XNET session with Signal In Single Point Read XNET function in LabVIEW with CAN Interface Module, error -1074384864 occurred. How to solve the issue? Error -1074384864 occurred at ...

https://knowledge.ni.com/KnowledgeArticleDetails?id=kA0VU0000002ukT0AQ&l=en-US
NI 9853 and 9852 with CompactRIO FAQ

Frequently Asked Questions about using the 9852 and 9853 modules in a CompactRIO system.

https://knowledge.ni.com/KnowledgeArticleDetails?id=kA00Z000000PASzSAO&l=en-US
How to Do UDS Test With CompactRIO and NI-985x

The NI-985x are only supported on FPGA as indicated inC Series Module and CompactDAQ/CompactRIO Hardware Compatibility. This article explains how you can use NI-985x modules with NI Automotive Diagnostic ...

https://knowledge.ni.com/KnowledgeArticleDetails?id=kA03q000000kOwxCAE&l=en-US
NI Module "Type Not Supported" Error in LabVIEW Project

I am adding modules to my CompactRIO in my LabVIEW project. For the NI-9853 device, I cannot see the module in the project and see Module 1 - type not supportedwhere the module should be. I can add the ...

https://knowledge.ni.com/KnowledgeArticleDetails?id=kA00Z0000015AQrSAM&l=en-US
Error -8014 When Using NI ADCS Toolkit With NI-985x

When I follow the steps How to Do UDS Test With CompactRIO and NI-985x, I get the following error:

https://knowledge.ni.com/KnowledgeArticleDetails?id=kA03q000000kOxCCAU&l=en-US
The Maximum Baud Rate for NI 9860

What is the maximum baud rate that NI 9860 can support? I could not find any information related to the baud rate in the NI 9860 specifications page.

https://knowledge.ni.com/KnowledgeArticleDetails?id=kA00Z000000g1DUSAY&l=en-US
Does NI 9151 Expansion Chassis Affect The Performance of C Series Modules ?

I use an NI 9151 R Series expansion chassis with a PXI R Series module. Will using an expansion chassis affect the performance of C Series modules compared to using it with other CompactRIO chassis? Is ...

https://knowledge.ni.com/KnowledgeArticleDetails?id=kA03q000001Dkf1CAC&l=en-US
Using ECUMC with CompactRIO and NI-985x

The ECU Measurement and Calibration (ECUMC) Toolkit is a software add-on for LabVIEW. It enables measurement and calibration applications for ECU design and validation. As the NI-985x is only supported ...

https://knowledge.ni.com/KnowledgeArticleDetails?id=kA0VU0000000Po10AE&l=en-US
Using NI-XNET in a Real-Time Startup Executable for CompactRIO or CompactDAQ

I want to use the NI-XNET API in the startup application on my real-time CompactDAQ (cDAQ) or CompactRIO (cRIO), and the code runs without issue from the development environment. However, when I try and ...

https://knowledge.ni.com/KnowledgeArticleDetails?id=kA00Z000000P8MLSA0&l=en-US
How Do I Change the Baud Rate of NI 9852 or NI 9853 CAN Modules?

I need to change the baud rate of a port on my NI 9852 or 9853 CompactRIO CAN module from the default of 500 Kbps. How do I do this?

https://knowledge.ni.com/KnowledgeArticleDetails?id=kA03q000001Dju0CAC&l=en-US

We want to hear about your experience!

If you didn't find what you needed or have other feedback, we'd love to learn how we can improve. Please schedule time to talk with us or provide written feedback here.