Archived: NI System Driver Set February 2014

NI does not actively maintain this document.

This content provides support for older products and technology, so you may notice outdated links or obsolete information about operating systems or other relevant products.

Contents

The NI System Driver Set February 2014 provides the latest version of NI drivers as of the release on February 27, 2014. NI LabVIEW 2013 SP1 is the latest version of the graphical development software supported by this driver set. This driver set adds support for the following hardware:

  • PXIe-8840
  • PXIe-4138/9
  • NI 9242/4 (CompactRIO only)

Contents

The following drivers are included in the February 2014 System Driver Set:

  • Data Acquisition
    • NI-DAQmx 9.8.0
    • Traditional NI-DAQ 7.4.4
  • Instrument Control
    • NI-488.2 3.1.2
    • NI-VISA 5.4.1*
    • NI-Serial 4.1*
    • IVI Compliance Package 4.6.1*
    • PXI Platform Services 4.0.1
    • NI-PXImc 1.0
    • NI System Monitor 1.2
    • NI-VXI 3.8.1
  • Modular Instruments
    • NI-Switch 4.8
    • NI-DMM 3.1
    • NI-Scope 4.1.3*
    • NI-RFSA 2.7.5
    • NI-FGEN 2.9.4*
    • NI-DCPower 1.9*
    • NI-RFSG 1.9.5
    • NI-HSDIO 2.0
    • NI-5690 1.1
    • NI-5640R 1.7
    • NI-OSI 2.1
    • NI-VNA 2.0.1
    • NI-HWS 1.5.1
  • Timing and Synchronization
    • NI-Sync 3.4.2*
    • NI-TimeSync 1.3
    • NI-1588 Configuration 1.3
  • Reconfigurable IO
    • CompactRIO 13.1*
    • R Series 13.1*
    • NI-FlexRIO 13.2*
      • FlexRIO Adapter Module Support 4.0
  • Motion
    • NI-Motion 8.5.1
  • Vision
    • NI-IMAQ 4.9*
    • NI-IMAQdx 4.3.5*
    • NI IMAQ I/O 2.9*
  • Distributed I/O
    • NI-FieldPoint 13.1*
    • NI-WSN 1.5.0*
  • Real-Time and Embedded
    • NI-488.2 3.1.2
    • NI-Serial 4.1*
    • NI-Watchdog 5.6*
  • Communication Buses and Protocols
    • NI-XNET 1.8
    •  NI-CAN 2.7.5
    • NI-DNET 1.6.7
    • NI-IndCom for CANopen 1.0.3
    • NI-IndCom for DeviceNet 2.3
    • NI-IndCom for EtherCat 2.6
  • Configuration and Utilities
    • NI I/O Trace 3.1.1
    • NI Measurement & Automation Explorer 5.6*
    • NI System Configuration 5.6*
    • NI Network Browser 5.5

*Update from NI System Driver Set November 2013.

 

Download

To download the February 2014 driver set run the downloader attached to this document. Note that this download is larger than 4 GB. Please follow the instructions in KnowledgeBase 4P3D5EP9 for downloading this file. 

 

Was this information helpful?

Yes

No