NI does not actively maintain this document.
This content provides support for older products and technology, so you may notice outdated links or obsolete information about operating systems or other relevant products.
The NI System Driver Set September 2011 provides the latest version of NI drivers as of the release on September 16, 2011. NI LabVIEW 2011 is the latest version of the graphical development software supported by this driver set. This set adds support for the following hardware: NI 9502 Brushless Sergo Drive Module, NI 9861 NI-XNET CAN Module, NI 9866 NI-XNET LIN Module, NI PXIe-5665 16 GHz VSA, NI 2512/13 Fault Insertion Units (FIU), and NI 2514/17 High-Speed Digital I/O Signal Insertion Switches.
The following drivers are included in the September 2011 set:
Data Acquisition
Instrument Control
Modular Instruments
Timing and Synchronization
Reconfigurable IO
Motion and Vision
Distributed I/O
Real-Time and Embedded
Communication Buses and Protocols
NI LabVIEW SignalExpress 2011
NI Trace 3.0
NI Measurement & Automation Explorer 5.0
NI System Configuration 5.0
NI Network Browser 5.0
NI-PAL 2.7
1NOTE: Major update from NI System Driver Set August 2011.
2NOTE: Minor update from NI System Driver Set August 2011.
3NOTE: New driver added from NI System Driver Set August 2011.