From Saturday, Nov 23rd 7:00 PM CST - Sunday, Nov 24th 7:45 AM CST, ni.com will undergo system upgrades that may result in temporary service interruption.

We appreciate your patience as we improve our online experience.

Home Support Documentation Compatibility

Archived: NI-CAN and LabWindows™/CVI Compatibility

Updated May 8, 2024

NI does not actively maintain this document.

This content provides support for older products and technology, so you may notice outdated links or obsolete information about operating systems or other relevant products.

Overview

Note: The last version of NI-CAN is 18.5. For continued support for using the CAN bus, use NI-XNET.

 

This page shows supported versions of the NI-CAN hardware driver with LabWindows CVI development systems. Reference this information to ensure you install the correct version when upgrading or updating your system or software. Using incompatible versions may result in errors, missing LabWindows CVI palettes or functions, or devices and tasks failing to show up in NI Measurement & Automation Explorer (MAX).

NI-CAN and LabWindows/CVI Compatibility

Back to top

In the Downloads section at the bottom of this page, you can download a copy of this table, which may include older software versions.

Use this table to compare NI-CAN and LabWindows/CVI Compatibility
NI-CANLabWindows/CVI Version
2017201520132012201020099.08.58.18.0
18.5          
18.0          
17.0          
16.0          
15.0          
14.0          
2.7.x          
2.6.3          
2.6.2          
2.6.1          

Compatible

Additional Resources

The mark LabWindows is used under a license from Microsoft Corporation. Windows is a registered trademark of Microsoft Corporation in the United States and other countries.

Back to top

Was this information helpful?

Yes

No