Use this guide to select the correct ethernet cable for your CompactRIO Controller. Whether you are creating a new configuration, replacing or expanding your current CompactRIO System, or verifying that existing parts can be used in a different configuration.
This page is part of the CompactRIO System Accessory Compatibility Guide.
This guide is intended to cover mounting, connectors, power supply and cables for use with your CompactRIO Controller and CompactRIO Chassis. It does not explicitly cover other NI product families such as RF, C Series Module, Digital Waveform Instruments (formerly HSDIO), Digital Pattern Instruments, NI High-Speed Serial Instruments, DAQ Multifunction I/O, or R Series. It also does not cover legacy or End of Life (EOL) parts or products.
Note: Using the page search functionality in your browser to locate your model may speed up this process. This is typically CTRL+F on Windows or ⌘+F on MacOS.
Note: N/A = Not Applicable
Note: P/N = Part Number
Controller | Ethernet Cable |
cRIO-9012 | P/N: 151733-02 (2 m) P/N: 151733-05 (5 m) P/N: 151733-10 (10 m) |
Chassis | Ethernet Cable |
NI 9144 NI 9145 NI 9146 NI 9147 NI 9148 NI 9149 | P/N: 151733-02 (2 m) P/N: 151733-05 (5 m) P/N: 151733-10 (10 m) |
NI 9154 NI 9155 NI 9155 NI 9157 NI 9159
| N/A |
To purchase, order by part number by noting the part number above and adding it to your cart, or you can click a linked part number in the preceding table and add to cart directly from the link in the top right corner of the first search result. You can also contact NI Sales for assistance.