This guide is intended to cover connectors and cables for use with C Series Modules. It does not explicitly cover other NI product families such as DAQ Multifunction I/O, Digital Waveform Instruments (formerly HSDIO), or R Series. It also does not cover legacy or End of Life (EOL) parts or products. Additionally, these products are supported in cRIO and/or cDAQ chassis, but this guide does not cover chassis accessories.
Note: Using the page search functionality in your browser to locate your model may speed up this process. This is typically CTRL+F on Windows or ⌘+F on MacOS.
This page is arranged by first having you identify the connector type on your C Series Module, locating the information for your specific model, and then choosing the accessory or cable combination that best fits your needs.
How to identify the model number of your C Series Module:
The model number of the C Series Module is printed on the faceplate of the actual module and also in the Getting Started that ships with the module.
Figure 1: C Series with LEMO Terminal Front Connection
Note: N/A= Not Applicable
Modules | Cable | Power Connection |
NI-9218 | NI 9982L, LEMO Screw Terminal Block P/N: 783410-01 NI 9983L, LEMO Current Shunt Adapter 0-20mA P/N: 783412-01 NI 9984L, 1/4 Bridge 120 OhmP/N: 783414-01 NI 9985L, 1/4 Bridge 350 OhmP/N: 783416-01 NI 9986L, 1/2 BridgeP/N: 783418-01 NI 9987L, LEMO 60 V Voltage AdapterP/N: 783420-01 LEMO Female to Pigtail I/O Cable, 1MP/N: 158293-01 LEMO Female to Pigtail I/O Cable, 2MP/N: 158293-02 LEMO PlugP/N: 784162-01 | Extra Power Connectors for NI 9218 LEMO P/N: 784161-01 2-Pos Micro-Fit Plug And Crimp Terminal Kit P/N: 783799-01 |
To purchase, order by part number by noting the part number above and adding it to your cart, or you can click a linked part number in the preceding table and add to cart directly from the link in the top right corner of the first search result. You can also contact NI Sales for assistance.