The following items are notable issues fixed between the release of RFmx Waveform Creator 20.6 and RFmx Waveform Creator 20.7, including additional patches and service packs. If you have an issue ID, you can search this list to validate that the issue has been fixed. This is not an exhaustive list of issues fixed in the current version of RFmx Waveform Creator.
|
Bug Number |
Legacy ID |
Description |
Details |
|---|---|---|---|
| 1517539 |
Unable to Save RFmx WLAN Waveforms in a Few Scenarios Though the License is ActivatedWorkaround: There is currently no known workaround for this issue. |
Reported Version: RFmx Waveform Creator 20.7 Resolved Version: RFmx Waveform Creator 20.7.1 Added: Jul 23, 2021 |
|
| 1357994 |
Incorrect Idle Interval in Waveform Generation for 11ax and 11be MU When Payload Lengths are Different Per User and Configured RU Offsets are Not in Ascending OrderWorkaround: There is currently no known workaround for this issue. |
Reported Version: RFmx Waveform Creator 20.0 Resolved Version: RFmx Waveform Creator 20.7 Added: Apr 14, 2021 |
|
| 1282319 |
Unknown Error is Thrown When Loading TDMS File of Waveform Version 1.0 in Multi-Carrier PluginWorkaround: There is currently no known workaround for this issue. |
Reported Version: RFmx Waveform Creator 20.0 Resolved Version: RFmx Waveform Creator 20.7 Added: Apr 14, 2021 |
|
| 1233202 |
Incorrect Behavior When Phase Continuous Control State is DisabledWorkaround: There is currently no known workaround for this issue. |
Reported Version: RFmx Waveform Creator 19.1 Resolved Version: RFmx Waveform Creator 20.7 Added: Apr 14, 2021 |
|
| 1080877 |
QT Exception is Generated When LoadWaveformConfiguration Function is Called From Waveform Creator NR .NET APIWorkaround: There is currently no known workaround for this issue. |
Reported Version: RFmx Waveform Creator 20.0 Resolved Version: RFmx Waveform Creator 20.7 Added: Apr 14, 2021 |
|
| 1008215 |
Invalid PDSCH RB allocation for SS/PBCH block and PDSCH bandwidth in the case of mixed numerologyIf the PDSCH option ‘PDSCH Present in SSB RBs’ is set to disabled then the PDSCH RB allocation may not be as specified. This applies only in case the SS/PBCH block and PDSCH Bandwidth Part use a different numerology or subcarrier spacing. Workaround: There is currently no known workaround for this issue. |
Reported Version: RFmx Waveform Creator 20.0 Resolved Version: RFmx Waveform Creator 20.7 Added: Apr 14, 2021 |
Installing some patches may require certain additional steps or considerations. Please refer to the following table for more information about patches for this release.
These patches currently do not have any special instructions.