The following items are notable issues fixed between the release of RFmx NR 20.6 and RFmx NR 20.7, including additional patches and service packs. If you have an issue ID, you can search this list to validate that the issue has been fixed. This is not an exhaustive list of issues fixed in the current version of RFmx NR.
|
Bug Number |
Legacy ID |
Description |
Details |
|---|---|---|---|
| 1507380 |
Spectral Flatness Measurement is Incorrect for Uplink FR2 Signal ConfigurationWorkaround: There is currently no known workaround for this issue. |
Reported Version: RFmx NR 20.7 Resolved Version: RFmx NR 20.7.1 Added: Jul 23, 2021 |
|
| 1181108 |
IQ Impairments Compensation is Not Supported When Phase Compensation is EnabledWorkaround: There is currently no known workaround for this issue. |
Reported Version: RFmx NR 20.6 Resolved Version: RFmx NR 20.7 Added: Apr 14, 2021 |
|
| 1173428 |
Rx IQ Impairments Estimation is Incorrect When Phase Compensation is EnabledWorkaround: There is currently no known workaround for this issue. |
Reported Version: RFmx NR 20.6 Resolved Version: RFmx NR 20.7 Added: Apr 14, 2021 |
|
| 1150386 |
Measured ModAcc EVM Is High When CFO Is Greater Than 450 Hz in the 400 MHz With 1024QAM ModulationWorkaround: There is currently no known workaround for this issue. |
Reported Version: RFmx NR 20.6 Resolved Version: RFmx NR 20.7 Added: Apr 14, 2021 |
|
| 1120322 |
Rx IQ Impairments Estimation is Degraded in the Presence of DC OffsetWorkaround: There is currently no known workaround for this issue. |
Reported Version: RFmx NR 20.6 Resolved Version: RFmx NR 20.7 Added: Apr 14, 2021 |
|
| 1066990 |
RFmx Does Not Offset LO At Some Frequencies for PXIe 5840/41 Even Though the Measurement Bandwidth Required is Less Than the Maximum Available Signal Bandwidth With LO OffsetIn RFmx, for PXIe 5840/41 devices, when ‘LO leakage Avoidance Enabled’ property is set to ‘True’, LO is not offset at some frequencies even though the measurement bandwidth required is less than the maximum available signal bandwidth with LO offset at those frequencies. This issue is seen at frequency band edges.
Workaround: There is currently no known workaround for this issue. |
Reported Version: RFmx NR 19.1 Resolved Version: RFmx NR 20.7 Added: Apr 14, 2021 |
|
| 1012861 |
Auto RB Detection Fails in case of Power Jumps in 1st SymbolWorkaround: There is currently no known workaround for this issue. |
Reported Version: RFmx NR 19.1 Resolved Version: RFmx NR 20.7 Added: Apr 14, 2021 |
Installing some patches may require certain additional steps or considerations. Please refer to the following table for more information about patches for this release.
These patches currently do not have any special instructions.