This document contains known issues for the LabVIEW 2018 Robotics Module. Not every issue known to NI will appear on this list; it is intended to only show the severe and more common issues that can be encountered. The LabVIEW 2018 Platform Known Issues contains a full listing of known issues, including LabVIEW toolkits and modules.
You can contact us by phone, email, or the discussion forums. Visit the NI Website to contact us. If you are contacting NI in regards to a specific issue, be sure to reference the ID. If you have feedback on this document, please contact NI on this NI Developer Zone post.
The following items are known issues in LabVIEW 2018 Robotics Module sorted by Date.
| ID | Known Issue | |||||
|---|---|---|---|---|---|---|
| 187772 Return | Performance of AD* VI slows over time If significant changes occur to the map the AD* VI operates on and the VI is configured to manage the epsilon value automatically, the VI runs significantly slower over time. Workaround: Try one of the following:
| |||||
| 356420 Return | Robotics Wizard cannot load a manifest file in a folder with a Chinese character in the name Robotics Wizard cannot load a manifest file in a folder with a Chinese character in the name Workaround: Move the manifest file to a new location
| |||||
| 406186 Return | Error -2147220308 in Hardware Setup Wizard when Connecting to Zynq Target Zynq targets require all web features to be installed in order to be recognized by the Hardware Setup Wizard. If a Zynq target has been reformatted these features will be removed, and error -2147220308 will be thrown in the Hardware Setup Wizard Workaround: In NI MAX install all web features and then restart the target.
| |||||
| 414047 Return | LabVIEW Crash if Project is Closed before Robotics Simulator is Stopped If a VI is still running that uses the Robotics Simulator, and the LabVIEW Project is closed, LabVIEW will crash. Workaround: Avoid closing the project while running the simulation service.
| |||||
| 394897 Return | NI MAX Does Not Detect Starter Kit 2.0 when Hardware Setup Wizard has Found Target Hardware Setup Wizard locks target when it is discovered in step 3. NI MAX will not be able to discover the locked target if it has not already discovered the target in the past. Workaround: Do not connect to target with NI MAX and Hardware Setup Wizard at the same time.
|
Document last updated on 5/18/2018