Each issue appears as a row in the table and includes the following fields:
| ID | Known Issue | |||||
|---|---|---|---|---|---|---|
| 504246 Return | Kintex-7 FPGA target may not download or change successfully in an NI PXI-1082 chassis. In rare instances, a Kintex-7 FPGA target may not download or change successfully in an NI PXI-1082 chassis. Workaround: Reboot the NI PXI-1082 chassis.
| |||||
| 503037 Return | PXIe-659xR Board Driver sessions may incorrectly read local devices when attempting to access remote devices. Board Driver methods (read temperature, power, and frequency counters) do not handle remote devices well. If you have a local device with the same RIO interface number as the remote device you are trying to access, you will read the power of the local device instead of the remote device. Workaround: Do not have any RIO devices on host computer.
| |||||
| 576099 Return | Error may be cleared in FPGA Close VI on Phar Lap RT. When using Phar Lap RT, the FPGA Close VI may clear an error that was generated earlier in the VI. This is most likely to occur while running Eye Scan, or using associated Eye Scan VIs. Workaround: Branch the error cluster wire around the FPGA Close VI and merge with the FPGA Close VI output error cluster wire.
|
The following list contains changes from earlier versions of NI LabVIEW Instrument Design Libraries for NI LabVIEW 2015 Instrument Design Libraries for High-Speed Serial Instruments. If you have a Bug ID, you can search this list to validate that the issue has been fixed. This is not an exhaustive list of issues fixed in the current version of NI LabVIEW Instrument Design Libraries for High-Speed Serial Instruments.
| Bug ID | Fixed Issue |
|---|---|
| NI LabVIEW 2015 Instrument Design Libraries for High-Speed Serial Instruments | |
| 520391 | Fixed an issue in the NI 6591R Simple Streaming Project that caused the Create AXI4-Lite Resources VI to create an invalid address space size for the project. |
| 530878 | Fixed an issue that inhibited exporting an external clock faster than 100 MHz. The new limit is 156.25 MHz. |
| 521583 | Fixed an issue that caused the Eye Scan to run with an incorrect sample multiplier. |
| 516064 | Fixed an issue that prevented creation of CLIP constraints using FPGA base clocks. |
| 511487 | Added the following missing error code: "-309809: You must specify at least one channel instance when calling Open Session.vi." |
Contact NI regarding this document or issues in the document. If you contact NI in regards to a specific issue, reference the ID number given in the document. The ID number contains the current issue ID number as well as the legacy ID number (use the current ID number when contacting NI). You can contact us through any of the normal support channels including phone, email, or the discussion forums. Visit the NI Website to contact us. Also contact us if you find a workaround for an issue that is not listed in the document.