This document contains known issues for the LabVIEW 2014 Control Design and Simulation Module. Not every issue known to NI will appear on this list; it is intended to only show the severe and more common issues that can be encountered.
You can contact us by phone, email, or the discussion forums. If you are contacting NI in regards to a specific issue, be sure to reference the ID.
*The FPGA Interface C API provides a communication layer between the LabVIEW FPGA VI and a C/C++ real-time application. It is not required if using LabVIEW Real-Time to build the real-time application.
The C/C++ cross compiler supports NI RIO hardware running NI Linux Real-Time operating system. Recommended for use with the 2014 release of NI Linux Real-Time.
NI Software | cRIO-906x, cRIO-903x, sbRIO-9651 | NI myRIO | cDAQ-913x | ||||||
---|---|---|---|---|---|---|---|---|---|
Required | Optional | Required | Optional | Required | Optional | ||||
LabVIEW 2014 | ✓ | ✓ | ✓ | ||||||
LabVIEW 2014 FPGA Module | ✓ | ✓ | n/a | n/a | |||||
LabVIEW 2014 Real-Time Module | ✓ | ✓ | ✓ | ||||||
NI RIO Device Drivers 2014 | ✓ | ✓ | n/a | n/a | |||||
FPGA Interface C API 14.0 | ✓ | ✓ | ✓ | ||||||
NI DAQmx 2014 | ✓ | ||||||||
C/C++ Development Tools for NI Linux Real-Time, Eclipse Edition 2014 | ✓ | ✓ | ✓ |
*The FPGA Interface C API provides a communication layer between the LabVIEW FPGA VI and a C/C++ real-time application. It is not required if using LabVIEW Real-Time to build the real-time application.