NI does not actively maintain this document.
This content provides support for older products and technology, so you may notice outdated links or obsolete information about operating systems or other relevant products.
You can contact us by phone, email, or the discussion forums. Visit the NI Website to contact us. If you are contacting NI in regards to a specific issue, be sure to reference the ID. If you have feedback on this document, please contact NI on this NI Developer Zone post.
National Instruments is committed to maintaining compatibility with Microsoft Windows technology changes. However, NI has become aware of a number of issues of potential significance regarding Microsoft Windows 7. To learn how Windows 7 affects your use of NI products, visit ni.com/info and enter the Info Code windows7.
The following items are known issues in MathScript RT 2011 sorted by Date.
| ID | Known Issue | |||||
|---|---|---|---|---|---|---|
| 194964 Return | RT Target may crash when closing the block diagram of a running VI with the MathScript Probe If you are running a VI on a Real-Time target with a MathScript Probe attached to a MathScript node, closing the block diagram may cause the target to crash. Workaround: Close the MathScript Probe before closing the block diagram.
| |||||
| 174668 Return | Removing inner function in .m file breaks VI When a referenced .m file contains two functions, one of which calls the other, removing the bottom function (and changing the top function to not depend on it) breaks the caller VI. Workaround: This is just an extraneous error appearing in the error list window. If all the other errors in the caller VI are fixed, the VI becomes good.
| |||||
| 232284 Return | Attaching a probe to large MathScript Node while running on RT can cause connection loss If a large MathScript Node is running on a RT target and you try to attach a probe, you occasionally lose connection to the target. If you then reconnect, the probe will work normally. Workaround: N/A
| |||||
| 234580 Return | Running 'clc' clears the output of some commands executed after calling it If 'clc' is used, it should clear the output window then run the script that follows it. The output window should populate with the output of the rest of the script. Instead, 'clc' ' clearis the output of some of the later commands in the same script. Workaround: N/A
| |||||
| 242487 Return | Cannot drag multiple variables between local and global categories If multiple variables are selected from the tree in the MathScript Window and dragged between local and global partiton/variable, only the one will move. Workaround: N/A
| |||||
| 281000 Return | LabVIEW MathScript hangs when calling a large model When loading a script with a large model (generated from another software tool), LabVIEW MathScript will hang. This behavior is due to the fact that LabVIEW runs out of memory when processing such a large model. Workaround: N/A
|
Document last updated on 7/22/2011