I have a PCI(e) or PXI(e)66xx Counter/Timercard or a USB-6xxx Multifunction I/O with counter functionalityand I want to make sure the countersare working properly. How can I test mydeviceto see if it is ...
I am using the Pulse Measurement Counter Input tasks in DAQmx with my DAQ device and I am getting the following error at DAQmx Create Channel VI :
Error -200431 occurred at DAQmx Create Channel (CI-Pulse ...
This tutorial provides step–by-step instructions for setting up your USB R Series device, adding it to a project, and creating an analog input acquisition using a DMA FIFO.
Requirements Software LabVIEW ...
I am using a DAQ device with a single ADC and want to know whether my floating channels will impact the maximum achievable sample rate? If I have open or disconnected channels on my DAQ device, will this ...
I have created a DAQmx Task that references multiple devices. I keep seeing error -89137. How can I fix this? I am programming multiple tasks or connecting multiple terminal routes in an NI-DAQmx device.However ...
I need to use hardware-timing on ports other than port 0 of my X series device. However, when I configure my task to include other ports, I receive Error -201062, pictured below. When trying to use PFI ...
I am running an application that is working with other cards in other computers. When I run it on this computer I get Error-200478 DAQmx Start Task.vi: 1Task Name: _unnamedTask<8>for an ...
I want to test the analog output of my DAQ device using the NI MAX Test Panels, however, I can't change the frequency of my analog output signal. Is it possible to modify it to get different frequencies? ...
I have two I/O devices of the same type (i.e. two sinking or two sourcing ones). I want to connect them together. Is that possible? Does my sinking output device require an external voltage source?