Filtered Results
Clear All
Showing 1 - 4 of 4 results
Reading the Cold Junction Compensation Value Directly

I have a SCB-68, SCB-68A or SCB-100 and I would like to measure the ambient temperature of the room. How can I read the value of the built-in cold junction compensation (CJC) sensor?

https://knowledge.ni.com/KnowledgeArticleDetails?id=kA00Z000000P9BsSAK&l=en-US
How Do I Use Built-In Cold Junction Compensation (CJC) When Creating Virtual Channels?

I am using a terminal block (or SCXI module) with built-in Cold Junction Compensation (CJC). However, when I am creating my virtual channels in Measurement & Automation Explorer, I am not given the option ...

https://knowledge.ni.com/KnowledgeArticleDetails?id=kA00Z0000004BGmSAM&l=en-US
Getting Started With NI R Series for USB Part 1: Introduction

This tutorial provides step–by-step instructions for setting up your USB R Series device, adding it to a project, and creating an analog input acquisition using a DMA FIFO. Requirements Software LabVIEW ...

https://knowledge.ni.com/KnowledgeArticleDetails?id=kA03q000000YHblCAG&l=en-US
Read Data from the Built-In CJC Sensor on DAQ Device in LabVIEW

I have cold junction compensation (CJC) sensors built into my analog input DAQ device or module like the NI 9214, 9219, or terminal block like the SCB-68, SCB-68A or SCB-100. How do I read the values from ...

https://knowledge.ni.com/KnowledgeArticleDetails?id=kA00Z0000019N2WSAU&l=en-US