I am using a voltage divider to bring 10V signals down to 5V for my NI 6509. The 6509 is configured to use the 47K pull downs and I use the same resistance in my divider. What is the input resistance ...

I'm configuring a Digital Change Detection on two different tasks on my PXIe-6509, but when I run the code, I get the following error: Error -50103 occurred at DAQmx Start Task.vi:7220001 Possible reason(s): ...

When I insert my PXI card into my system, it appears in NI Measurement & Automation Explorer (NI MAX) as a PCI card.

The following devices support programmable power up states: 6509 651x (6512, 6513, 6514, 6515) 652x (6525, 6527, 6528), All M Series boards (62xx) All X Series boards (63xx) You can set power-up states ...

I am using anNI-651xdigital board, one of the 30 V bank isolated industrial devices. These devices require an external power supply for sourcing and sinking output signals. What kind of voltage drop can ...

I'm trying to determine the maximum array size that I can write from LabVIEW to my Digital I/O Module. The specifications for my device list an onboard memory size but it appears I can write an array larger ...

I would like to configure some of the DIO lines for input while other lines in the same DIO port are configured for output. On which boards can the DIO lines be individually configured? In software I am ...

I am able to see some of the possible I/O Option Names for my control or constant in LabVIEW, but the DAQmx Terminal Control on the front panel or the DAQmx Terminal Constant on the block diagram does ...

I have an NI DAQ product that supports digital operations at 5 V TTL logic levels. I need to drive 3.3 V TTL. Is there anything that I can do? Can I programmatically change the digital output of PXI 6509 ...

I have a NI hardware configurationand I want to use one input signal to triggera particular task or operation on my LabVIEW code. I want to synchronizetwo tasks to execute one after the other and my NI ...