I am trying to connect a BNC-2110 to the PCIe-6323 but I see that the PCIe-6323 has two connections on it. If I just connect one BNC board to the card, can I use all four analog output channels on the ...

I am trying to achieve multiple analog outputs on my BNC-2110 devices. I have managed to get channels AO0 and AO1 working but the other analog outputs don't seem to work. The documentation of the BNC-2110 ...

What is theinput impedance of the BNC-2110 PFI terminals?

I am using two BNC-2110 terminal blocks for digital input or digital output with my M Series DAQ board. The installation instructions do not explicitly state that my device is compatible with the BNC-2110, ...

I am using PCIe-6738 with BNC-2110 by connecting it to SHC-68-A2 cable to acquire analog signal. However, when I control AO0 from the PCIe-6738 board, the output comes out of AO15 on the BNC-2110 instead ...

I am using a BNC-2110 with my Data Acquisition card, and I need to know how to wire the Analog Out terminals for my device. Do they need to be FS (Floating signal) or GS (Grounded signal) when outputting ...

I am using a terminal block (or SCXI module) with built-in Cold Junction Compensation (CJC). However, when I am creating my virtual channels in Measurement & Automation Explorer, I am not given the option ...

Which devices are compatible with the NI BNC-2110?

This tutorial provides step–by-step instructions for setting up your USB R Series device, adding it to a project, and creating an analog input acquisition using a DMA FIFO. Requirements Software LabVIEW ...

I have a BNC-2121 breakout board connected to a PCIe-6612. I want to use it to receive a starting trigger and then output pulse signals (generated by the counters) on five lines. They pulse signals shall ...