This document contains the LabVIEW known issues that were discovered before and since the release of LabVIEW 2022 Q3. Known issues are performance issues or technical bugs that NI has acknowledged exist within this version of the product.
Not every issue known to NI appears on this list; it is intended to show the most severe and common issues that you may encounter and provide workarounds when possible. Other technical issues that you may encounter could occur through normal product use or system compatibility issues. You may find more information on these issues in NI’s Product Documentation, Knowledgebase, or Community; see Additional Resources.
|
Bug Number |
Legacy ID |
Description |
Details |
|---|---|---|---|
LabVIEW 2022 Q3 Documentation Contains Content from LabVIEW 2021The LabVIEW 2022 Q3 Help includes the same contents as the LabVIEW 2021 Help. The Help does not describe any new features or changes in the functionality.
Workaround: For information about the new and changed functionality in LabVIEW 2022 Q3, please refer to https://www.ni.com/docs/en-US/bundle/upgrading-labview/.
|
Reported Version: LabVIEW 2022 Q3 Resolved Version: N/A Added: Jul 27, 2022 |
||
| 2065508 |
Using the DAQAssistant with DAQmx 2022 Q3 on LabVIEW 2022 Q3 Fails to Generate CodeUsing the DAQAssistant on LabVIEW 2022 Q3 with DAQmx 2022 Q3 installed fails to configure the DAQAssistant node and gives the following code generation error: "LabVIEW Code Generation failed to execute. This may occur if the code gen engine is not properly installed, or if you are using a LabVIEW version under development" . Other workflows that use the DAQ Assistant to generate DAQmx tasks also fail.
Workaround: Install NI-DAQmx 2024 Q1 or later. Alternatively, install LabVIEW 2021 SP1
|
Reported Version: NI-DAQmx 2022 Q3 Resolved Version: NI-DAQmx 2024 Q1 Added: Aug 2, 2022 |
|
| 2051887 |
LabVIEW Offline Help Is Unavailable on Windows Server 2016Workaround: Use the online help from ni.com.
|
Reported Version: LabVIEW 2022 Q3 | Software Platform Bundle 2022 Q3 Resolved Version: N/A Added: Jul 27, 2022 |
|
| 2062084 |
CompactRIO Single Board Controllers with NI-DAQmx Support and Real-Time Scan Resources Will Fail to Compile Bitfiles on LabVIEW 2022 Q3Compilation failures with timing violations are likely to occur for users with C Series modules under Real-Time Scan Resources.The targets affected are sbRIO-9603, sbRIO-9608, sbRIO-9609, sbRIO-9626, sbRIO-9629, sbRIO-9638. Workaround: Use LabVIEW 2021 or earlier for these targets
|
Reported Version: NI CompactRIO 2022 Q3 Resolved Version: N/A Added: Aug 2, 2022 |
|
| 2057366 |
Loading a Project Containing RT CompactDAQ Target on LabVIEW 2022 Q3 when LabVIEW RT is Not Installed Crashes LabVIEWConsider a case where LV 2022 Q3 and DAQmx 22.8 are installed, but not LabVIEW Real-Time. When trying to create a new project and adding an RT CompactDAQ Target to the project, clicking on the newly added target causes LabVIEW to churn for a few seconds and then crash. Steps to reproduce:
Workaround: Install LabVIEW Real-Time on the system and re-open the project
|
Reported Version: NI-DAQmx 2022 Q3 Resolved Version: N/A Added: Aug 2, 2022 |
|
| 2081071 |
LabVIEW Occasionally Crashes the Running System Exec Call That Produces Error OutputLabVIEW occasionally crashes when running the System Exec, if the executed command produces a large amount of stderr output.
Workaround: There is currently no known workaround for this issue. |
Reported Version: LabVIEW 2022 Q3 Resolved Version: N/A Added: Jul 27, 2022 |
|
| 2052750 |
Same Version of LabVIEW Is Listed Twice in Software Section of NI MAXWorkaround: There is currently no known workaround for this issue. |
Reported Version: LabVIEW 2022 Q3 Resolved Version: N/A Added: Jul 26, 2022 |
|
| 2081644 |
Some Localized Examples Are Missing in Example FinderWorkaround: Copy the contents of the localized exbins folders (such as C:\Program Files (x86)\National Instruments\Shared\Example Finder\1.0\Products\LabVIEW\22.0\exbins\Chinese) into the English folder (C:\Program Files (x86)\National Instruments\Shared\Example Finder\1.0\Products\LabVIEW\22.0\exbins\English), and delete the localized folders. |
Reported Version: LabVIEW FPGA Module 2022 Q3 Resolved Version: N/A Added: Jul 26, 2022 |
|
| 2104674 |
Unable to Install LabVIEW 2022 Q3 on Ubuntu 22.04A default installation of Ubuntu 22.04 (Jammy Jellyfish) fails to install LabVIEW 2022 Q3 due to missing dependencies such as libncurses5, libldap-2.4-2, and libopenal1. Beginning with version 22.04, these packages are no longer shipped in the Ubuntu distribution. They were included in previous versions of Ubuntu. Workaround: From NI Linux Device Drivers 2022 Q4 or later, install ni-hwcfg-utility. It will provide LabVIEW with updated versions of components that do not rely on the missing legacy components.
|
Reported Version: LabVIEW 2022 Q3 Resolved Version: N/A Added: Oct 24, 2022 |
Issues found in this section will not be listed in future known issues documents for this product.
There are currently no issues to list.
Explore Support Content and Product Documentation
Ask the NI Community
Request Support from an Engineer
A valid service agreement may be required, and support options vary by country