Standard Function:Waveform Property
- Updated2023-02-21
- 1 minute(s) read
Standard Function:Waveform Property
Short Name: Waveform
Property of niFgen
Specifies which standard waveform the signal generator produces. Use this property only when the Output Mode property is set to NIFGEN_VAL_OUTPUT_FUNC.
Default Value: NIFGEN_VAL_WFM_DC
| Sine (1) |
Specifies that the signal generator produces a sinusoid waveform. |
| Square (2) |
Specifies that the signal generator produces a square waveform. |
| Triangle (3) |
Specifies that the signal generator produces a triangle waveform. |
| Ramp Up (4) |
Specifies that the signal generator produces a positive ramp waveform. |
| Ramp Down (5) |
Specifies that the signal generator produces a negative ramp waveform. |
| DC (6) |
Specifies that the signal generator produces a constant voltage. |
| Noise (101) |
Specifies that the signal generator produces white noise. |
| User (102) |
Specifies that the signal generator produces a user-defined waveform, defined by the niFgen Define User Standard Waveform VI. |
Remarks
The following table lists the characteristics of this property.
| Datatype |  |
| Permissions | Read/Write |
| High-level VIs | niFgen Configure Standard Waveform |
| Channel-based | Yes |
| Resettable | No |