RFmxWCDMA_BuildCarrierString2
- Updated2025-10-13
- 1 minute(s) read
Creates the carrier string to use as the selector string with the SEM and ACP carrier configuration or fetch functions, properties, and results.
Syntax
int32 __stdcall RFmxWCDMA_BuildCarrierString2(char selectorString[], int32 carrierNumber, int32 selectorStringOutLength, char selectorStringOut[])
Parameters
| Name | Direction | Type | Description |
|---|---|---|---|
| selectorString | [in] | char[] | This parameter specifies a Selector String comprising of the signal name and result name. If you do not specify the signal name, the default signal instance is used. If you do not specify the result name, the default result instance is used. The default value is "" (empty string). Example: "signal::sig1" "result::r1" "signal::sig1/result::r1" You can use the RFmxWCDMA_BuildSignalString function to build the selector string. |
| carrierNumber | [in] | int32 | This parameter specifies the carrier number for building the selector string. |
| selectorStringOutLength | [out] | int32 | Specifies the length of the string that is returned by the selectorStringOut parameter. To get the minimum buffer size required to build the selector string, set the selectorStringOutLength parameter to 0. |
| selectorStringOut | [out] | char[] | This parameter returns the selector string that can be passed to the Selector String parameter of Fetch functions. |
Returns
Returns the status code of this operation. The status code either indicates success or describes an error or warning condition. Examine the status code from each call to an RFmx function to determine if an error has occurred.
To obtain a text description of the status code and additional information about the error condition, call the RFmxWCDMA_GetError function.
The general meaning of the status code is as follows:
Value | Meaning |
|---|---|
0 | Success |
Positive Values | Warnings |
Negative Values | Errors |