Mounting with the V-Mount Kit
- Updated2023-02-20
- 1 minute(s) read
Mounting with the V-Mount Kit
You can use the V-Mount Kit to mount the NI TSM-1012 to a wall, ceiling, desk, or other surface. The V-Mount has a 0 to 90 degree adjustable hinge to optimize the viewing angle of the monitor.
Note The V-Mount is compatible only with the NI TSM-1012.
Take the following steps to mount the NI TSM-1012 with the V-Mount Kit.
- Mark the locations of the four V-Mount retention screw holes on the mounting surface.
- Align the VESA mounting holes in the V-Mount with the mounting holes in the rear of the monitor.
-
Insert retention screws through the VESA mounting holes to secure the V-Mount to the monitor.
Note The VESA holes on the monitor are designed for M4 screws and set at 100.0 mm × 100.0 mm (3.94 in. × 3.94 in.) apart.
- Secure the V-Mount and monitor to the surface with retention screws in the locations you marked in step 1.