Installing the TS-15000/15010
- Updated2023-03-14
- 1 minute(s) read
Installing the TS-15000/15010
Notice To prevent damage to
the TS-15000/15010 caused by ESD
or contamination, handle the device using the edges or the metal bracket.
- Connect the TS-15000/15010 with the USB cable to any available USB port on your computer.
- Power on the TS-15000/15010. Refer to the Power Considerationstopic for additional information on providing power to your TestScale assembly.
- Double-click the NI MAX icon on the desktop to open Measurement & Automation Explorer (MAX). Expand Devices and Interfaces and verify that your backplane is listed there. If your backplane does not appear, press <F5> to refresh the view in MAX. If your backplane is still not recognized, refer to ni.com/support/daqmx for troubleshooting information.
-
Self-test your backplane in MAX by expanding Devices and
Interfaces, right-clicking TS-<model
number>, and selecting
Self-Test. Self-test performs a brief test to
determine successful backplane installation. When the self-test finishes, a
message indicates successful verification or if an error occurred. If an error
occurs, refer to ni.com/support/daqmx.
Note When in use, the TS-15000/15010 may become warm to the touch. This is normal.