TB-4309 Specifications

Definitions

Characteristics describe values that are relevant to the use of the model under stated operating conditions but are not covered by the model warranty.

  • Typical specifications describe the performance met by a majority of models.

Specifications are Typical unless otherwise noted.

Calibration

Calibration interval

No calibration

Electrical

Input range

±0.1 V,

±1.0 V,

±10 V,

±15 V

Physical

Weight

TB-4309 (ST)

615 g (21.7 oz)

TB-4309 (MT)

483 g (17.0 oz)

Notice Clean the hardware with a soft, nonmetallic brush. Make sure that the hardware is completely dry and free from contaminants before returning it to service.

Mechanical

Screw terminal wire gauge

1.5 mm2 (16 AWG), maximum

Dimensions

Figure 1. TB-4309 (ST) Terminal Block Dimensions

1378

Figure 2. TB-4309 (MT) Terminal Block Dimensions

1378

Environmental

Maximum altitude

2,000 m (800 mbar), at 25 °C ambient temperature

Pollution Degree

2

Indoor use only.

Operating Environment

Ambient temperature range

0 °C to 55 °C (Tested in accordance with IEC 60068-2-1 and IEC 60068-2-2. Meets MIL-PRF-28800F Class 3 low temperature limit and MIL-PRF-28800F Class 2 high temperature limit.)

Relative humidity range

10% to 90%, noncondensing (Tested in accordance with IEC 60068-2-56.)

Storage Environment

Ambient temperature range

-40 °C to 71 °C (Tested in accordance with IEC 60068-2-1 and IEC 60068-2-2. Meets MIL-PRF-28800F Class 3 limits.)

Relative humidity range

5% to 95%, noncondensing (Tested in accordance with IEC 60068-2-56.)

Shock and Vibration

Operating shock

30 g peak, half-sine, 11 ms pulse (Tested in accordance with IEC 60068-2-27. Meets MIL-PRF-28800F Class 2 limits.)

Random vibration

Operating

5 Hz to 500 Hz, 0.3 grms

Non-operating

5 Hz to 500 Hz, 2.4 grms (Tested in accordance with IEC 60068-2-64. Non-operating test profile exceeds the requirements of MIL-PRF-28800F, Class 3.)

TB-4309 Terminal Block Pinouts

Note Pin descriptions and signal mappings to the PXIe-4309 front panel I/O connectors are listed in PXIe-4309 Pinout.

TB-4309 (ST) Screw Terminal Connectors

Figure 3. TB-4309 (ST) Pinouts

1378

TB-4309 (MT) VHDCI Terminal Connectors

Figure 4. TB-4309 (MT) Connector 0 and 2 Pinout

1378

Figure 5. TB-4309 (MT) Connector 1 and 3 Pinout

1378