Other Equipment

There are several items not included in your SCB-8 kit that you need to operate the SCB-8.

Required Items

  • NI hardware with compatible Molex Nano-Pitch I/O connector
  • OCuLink x4, 1 m cable (NI part number 785486-01)
    Note Using an OCuLink x4 cable supplied by another manufacturer is not recommended.
  • Phillips #1 screwdriver
  • 0.125 in. flathead screwdriver

Visit ni.com for more information about these additional items.

Optional Items

  • Shielded, multiconductor cable with 14–30 AWG wire
  • 16 position 0.1 inch dual row header
  • Wire cutters
  • Wire insulation stripper