Installing the RTG Components

Set up the RTG hardware components in the PXI chassis.

Complete the following tasks before installing, configuring, or operating the components included in the system.
  • Review the safety and compliance documentation for each component in the system.
  • Assemble the tools needed for installation.
Complete the following steps.
  1. Install and configure the PXI chassis according to the PXI chassis documentation.
  2. Install and configure the PXI controller as a Windows OS controller according to the PXI controller documentation.
  3. Set up the VST instrument(s). Refer to the VST documentation for information about performing each step.
    1. Install the VST in the PXI chassis.
    2. Connect all inter-module cabling, ensuring that all cables are properly installed to their recommended torque specifications.
    3. (Optional) If the VST includes mmWave radio heads, set up the devices and connect with the recommended cables and power supply adapter.
  4. (Optional) Install the agile attenuator in the PXI chassis, as described in the agile attenuator documentation.
  5. (Optional) Install the SCB-42 in the PXI chassis, as described in the SCB-42 documentation.
  6. (Optional) Install the coprocessor in the PXI chassis, as described in the coprocessor documentation.
  7. (Optional) Install the synchronization module in a PXI Express timing slot in the PXI chassis, as described in the synchronization module documentation.
  8. Install slot blockers and slot covers in unused slots to ensure proper cooling. Refer to the PXI chassis documentation to ensure adequate chassis cooling and ventilation.
  9. Power on the chassis.
  10. Set the chassis fan speed to AUTO or HIGH, depending on the chassis. Refer to the PXI chassis documentation for information about setting the fan mode.