ACP:Offset:Frequency (Hz)
- Updated2024-10-08
- 1 minute(s) read
ACP:Offset:Frequency (Hz)
Specifies the offset frequency of an offset channel. This value is expressed in Hz. The offset frequency is computed from the center of a reference component carrier/subblock to the center of the nearest RBW filter of the offset channel.
Use "offset<k>" or "subblock<n>" or "subblock<n>/offset<k>" as the Selector Strings to read this result.
The default value is 10 MHz.
Remarks
The following table lists the characteristics of this property.
Short Name | ACP Offset Freq (Hz) |
Data type | |
Permissions | Read/Write |
High-level VIs | N/A |
Resettable | Yes |