Performing a Self-Calibration Using NI-RFSA

NI recommends you perform the self-calibration using the NI-RFSA example when you self-calibrate the module.
  1. Select Start » All Programs » National Instruments » LabVIEW to launch LabVIEW.
  2. Launch the Example Finder and navigate to the example.
    1. Select Hardware Input and Output » Modular Instruments » NI-RFSA » Utilities » RFSA Self Calibration.
    2. Open the example.
  3. Complete the following steps to configure the example:
    1. Select the device identifier assigned to the PXIe-3622 in MAX in the [Resource Name] drop-down menu.
    2. Set Clock Source to OnboardClock.
    3. Set Self Calibration Step Operations to Perform All Self Calibration Steps.
  4. Run the VI.