Get Calibration Measurement VI

Fetches the raw calibration measurements for various calibration methods. Refer to the SOLT Measurements output and TRL Measurements output for details.


icon

Inputs/Outputs

  • cdatavalref.png S-Par Reference In —

    Specifies the session reference handle of the S-parameter measurement session.

  • cerrcodeclst.png error in —

    Error conditions that occur before this node runs. This input provides standard error in functionality.

  • idatavalref.png S-Par Reference Out —

    Returns the session reference handle of the S-parameter measurement session.

  • i1dcclst.png SOLT Measurements —

    Returns raw calibration measurements for SOLT, SOLR, and QSOLT calibration. Each element in the array is one point out of averaging count points as configured in the Configure Averaging VI.

  • i2dcdb.png Port 1 SOL —

    Short, open, and load measurements from port 1 as a 2D array of complex doubles. The first index of the array selects the measurement and the second index selects the point in the frequency sweep. The order of the measurements are reference receiver short, test receiver short, reference receiver open, test receiver open, reference receiver load, and test receiver load.

  • i2dcdb.png Port 2 SOL —

    Short, open, and load measurements from port 2 as a 2D array of complex doubles. The first index of the array selects the measurement and the second index selects the point in the frequency sweep. The order of the measurements are reference receiver short, test receiver short, reference receiver open, test receiver open, reference receiver load, and test receiver load.

  • icclst.png Through —

    The through measurement from a calibration.

  • icclst.png forward —

    The measurement when port 1 is generating.

  • i1dcdb.png In Port Reference —

    The measurement of the reference receiver at the receiving port.

  • i1dcdb.png In Port Test —

    The measurement of the test receiver at the receiving port.

  • i1dcdb.png Out Port Reference —

    The measurement of the reference receiver at the generating port.

  • i1dcdb.png Out Port Test —

    The measurement of the test receiver at the generating port.

  • icclst.png reverse —

    The measurement when port 2 is generating.

  • i1dcdb.png In Port Reference —

    The measurement of the reference receiver at the receiving port.

  • i1dcdb.png In Port Test —

    The measurement of the test receiver at the receiving port.

  • i1dcdb.png Out Port Reference —

    The measurement of the reference receiver at the generating port.

  • i1dcdb.png Out Port Test —

    The measurement of the test receiver at the generating port.

  • i1dcclst.png TRL Measurements —

    Returns raw calibration measurements for TRL calibration. Each element in the array is one point out of averaging count points as configured in the Configure Averaging VI.

  • i2dcdb.png Port 1 Reflection —

    Reflection measurements from port 1 as a 2D array of complex doubles. The first index of the array selects the measurement and the second index selects the point in the frequency sweep. The order of the measurements are reference receiver reflection and test receiver reflection.

  • i2dcdb.png Port 2 Reflection —

    Reflection measurements from port 2 as a 2D array of complex doubles. The first index of the array selects the measurement and the second index selects the point in the frequency sweep. The order of the measurements are reference receiver reflection and test receiver reflection.

  • icclst.png Through —

    The through measurement from a calibration.

  • icclst.png forward —

    The measurement when port 1 is generating.

  • i1dcdb.png In Port Reference —

    The measurement of the reference receiver at the receiving port.

  • i1dcdb.png In Port Test —

    The measurement of the test receiver at the receiving port.

  • i1dcdb.png Out Port Reference —

    The measurement of the reference receiver at the generating port.

  • i1dcdb.png Out Port Test —

    The measurement of the test receiver at the generating port.

  • icclst.png reverse —

    The measurement when port 2 is generating.

  • i1dcdb.png In Port Reference —

    The measurement of the reference receiver at the receiving port.

  • i1dcdb.png In Port Test —

    The measurement of the test receiver at the receiving port.

  • i1dcdb.png Out Port Reference —

    The measurement of the reference receiver at the generating port.

  • i1dcdb.png Out Port Test —

    The measurement of the test receiver at the generating port.

  • i1dcclst.png Lines —

    Line measurements as a 1D array. Each element of the array contains the measurements for one of the lines in a TRL calibration.

  • icclst.png forward —

    The measurement when port 1 is generating.

  • i1dcdb.png In Port Reference —

    The measurement of the reference receiver at the receiving port.

  • i1dcdb.png In Port Test —

    The measurement of the test receiver at the receiving port.

  • i1dcdb.png Out Port Reference —

    The measurement of the reference receiver at the generating port.

  • i1dcdb.png Out Port Test —

    The measurement of the test receiver at the generating port.

  • icclst.png reverse —

    The measurement when port 2 is generating.

  • i1dcdb.png In Port Reference —

    The measurement of the reference receiver at the receiving port.

  • i1dcdb.png In Port Test —

    The measurement of the test receiver at the receiving port.

  • i1dcdb.png Out Port Reference —

    The measurement of the reference receiver at the generating port.

  • i1dcdb.png Out Port Test —

    The measurement of the test receiver at the generating port.

  • ierrcodeclst.png error out —

    Error information. This output provides standard error out functionality.