Device Specific:Vector Signal Transceiver:Upconverter:Frequency Offset (Hz) Property
- Updated2024-05-08
- 2 minute(s) read
Device Specific:Vector Signal Transceiver:Upconverter:Frequency Offset (Hz) Property
Short Name: Upconverter Frequency Offset (Hz)
Property of niRFSG
This property offsets the Upconverter Center Frequency (Hz) from the RF frequency. Use this property to keep the local oscillator (LO) leakage at a determined offset from the RF signal.
 |
Note You cannot set the Upconverter Center Frequency (Hz) property or the Arb Carrier Frequency (Hz) property at the same time as the Upconverter Frequency Offset (Hz) property. |
|
Note Resetting this property disables the upconverter frequency offset. |
Supported Devices: PXIe-5644/5645/5646, PXIe-5830/5831/5832/5840/5841/5842
Valid Values:
PXIe-5644/5645: -42 MHz to +42 MHz
PXIe-5646: -100 MHz to +100 MHz
PXIe-5830/5831/5832/5840/5841: -500 MHz to +500 MHz
PXIe-5842: -1 GHz to +1 GHz
Related Topics
PXIe-5830 Frequency and Bandwidth Selection
PXIe-5831/5832 Frequency and Bandwidth Selection
PXIe-5841 Frequency and Bandwidth Selection
Remarks
The following table lists the characteristics of this property.
| Datatype |  |
| Permissions | Read/Write |
| High-level VIs | N/A |
| Channel-based | No |
| Resettable | Yes |