Measure VI

Adds the measured RFmx Transmission Power (TXP) and the DC Power (SMU power) for the specific iteration in the PAE reference. This is used to calculate the PAE and PxdB measurements.


icon

Inputs/Outputs

  • cdatavalref.png PAE Reference In —

    Specifies the session reference handle of the PAE measurement session.

  • ci32.png Loop Iteration Index —

    Specifies the index used to calculate the power/frequency that is applied to RFSG and RFmx. This value is, in general, specified by the iteration terminal (i) of the For Loop.

  • cdbl.png Measured RF Power —

    Specifies the RF power that was measured with the RFmx TXP measurement. This value is expressed in dBm.

  • cdbl.png Measured DC Power —

    Specifies the measured DC Power defined by the current and voltage measured by the SMU (or by any other technique). This value is expressed in units determined by the DC Power Unit parameter.

  • cerrcodeclst.png error in —

    Error conditions that occur before this node runs. This input provides standard error in functionality.

  • cu16.png DC Power Unit —

    Specifies the unit used to calculate the DC Power. This value can either be expressed in dBm or watt. The default value is watt.

  • idatavalref.png PAE Reference Out —

    Returns the session reference handle of the PAE measurement session.

  • ierrcodeclst.png error out —

    Error information. This output provides standard error out functionality.