Start >> Analog Edge >> Coupling
- Updated2023-03-16
- 1 minute(s) read
Start >> Analog Edge >> Coupling
| Data Type: | int32 |
| Description: | Specifies the coupling for the source signal of the trigger if the source is a terminal rather than a virtual channel. |
Valid values
| DAQmx_Val_AC | 10045 | Alternating Current. |
| DAQmx_Val_DC | 10050 | Direct Current. |
You can get/set/reset this property using:
DAQmxGetAnlgEdgeStartTrigCoupling
DAQmxSetAnlgEdgeStartTrigCoupling
DAQmxResetAnlgEdgeStartTrigCoupling