Installing the FlexRIO Adapter Module

Skip this section if you are not using a FlexRIO adapter module.

  1. Gently insert the guide pins and the high-density card edge of the FlexRIO adapter module into the corresponding connectors of the NI-7935R.
    The connection may be tight, but do not force the adapter module into place.
  2. Tighten the captive screws on the FlexRIO adapter module to secure it to the NI-7935R.

The following figure shows the NI-7935R with the FlexRIO adapter module connected.

Figure 1. NI-7935R with FlexRIO Adapter Module

1378

Refer to the getting started guide for your adapter module for more information about your adapter module, including programming information.