Connecting the NI-7935R to the Host Computer Using the USB Device Port

Complete the following steps to connect the NI-7935R to the host computer using the USB device port.

  1. Power on the host computer.
  2. Connect the NI-7935R to the host computer using the USB A-to-B cable.
    Notice NI requires the use of a locking USB cable (157788-01) to meet the shock and vibration specifications, as listed in the specifications for your controller.
    The device driver software automatically detects the NI-7935R. If the device driver software does not detect the NI-7935R, verify that you installed the appropriate NI software in the correct order on the host computer.