VXI/VME Settings:VXI Trigger Directions

Specifies the directions of the mapped TTL triggers lines. This is a bit vector where bits 0-7 represent TTL triggers 0-7 respectively. A bit value of 0 means the corresponding line is routed out of the frame, and a value of 1 means the line is routed into the frame. Lines must be enabled using VXI/VME Settings:VXI Trigger Lines Enable.

Remarks

The following table lists the characteristics of this property.

Short Name VXI Trig Dir
Data type cu16.png
Permissions Read/Write
Available in Run-Time Engine Yes
Available in Real-Time Operating System Yes