IVN-8563 Theory of Operation

The IVN-8563 has two communication ports. one USB mini-B (miniUSB) port to support device configuration, and one USB type-C port to supply power. Port 1 is a 10BASE-T1S port for Automotive Ethernet connections using two-position terminal blocks. Port 2 is a 10/100BASE-TX ports for Ethernet connections using 8-pin, modular RJ-45 connectors. The 10BASE-T1S interface uses an Onsemi NCN26010 10 Mb/s Industrial Ethernet MACPHY Controller. Weidmuller OMNIMATE SL-SMT 3.50/02/90LF terminal block headers are used to connect to these ports. Compatible plugs are included with the IVN-8563. The 10BASE-T1S port can be configured as coordinator or follower.

The USB mini-B (miniUSB) connector allows you to access and modify the device configuration. A USB cable with a USB mini-B (miniUSB) connector is required. This cable is not included with the IVN-8563.

Use the included USB type-A to USB type-C cable to power the device from a standard USB 3.0 port on your computer, NI PXI controller, CompactRIO controller, or other industrial controller.