Repair
- Updated2023-02-17
- 4 minute(s) read
Repair
Notice Ensure that ITS-16200 repair procedures are
performed only by qualified personnel.
Notice The AC power cords
used in the ITS-16200 are
specially designed for the ITS-16200. Do not use these power cords in other electrical
appliances. Refer to the following table for system-specific power cords and
associated part numbers.
Note NI provides Advanced Replacement Service for replacement parts in the following
table unless otherwise noted.
Type | NI Part Number | Function and Model |
---|---|---|
Chassis | 783882-01 | PXIe-1095 |
784532-01 | SLSC-12001 | |
PXI Instruments | 781056-01 | CCA, NI PXIe-6363 |
783800-01 | CCA, PXIe-6738, 32 CH AO | |
784122-01 | CCA, PXIe-8510, HD XNET 6 Port | |
785571-01 | CCA, PXIe-7868R, 512 MB DRAM, Kintex-7 325T, 16-bit, 1 MS/s | |
Controller | 787805-33 | Module Assembly, PXIe-8881, Linux RT, W-2245, No TPM, Base SSD, 2 SO-DIMM |
Power Supplies | 781095-01 | Power Supply, 24 V, 480 W, PS-17 |
785341-01 | NI RMX-10050 1-Phase Power Distribution Unit with DC (1U, 100 V to 240V, 16 A, 12/24/24/48 VDC) | |
786012-01 | RMX-4102 2U DC Power Supply, 1/6 Rack Width, 0 VDC to 36 VDC, 0 A to 12 A | |
786013-01 | RMX-4102 2U DC Power Supply, 1/6 Rack Width, 0 VDC to 60 VDC, 0 A to 7 A | |
SLSC Instruments | 788249-01 | OP-8911-F High Speed Digital IO Conditioning Board |
787855-01 | OP-8913-F High Speed Digital IO Conditioning Board | |
785356-01 | CCA, SLSC-12201 | |
785379-01 | CCA, RTI-12307 | |
787856-01[1] | OPAL 8934-F, 16 A OUT Differential From Single-Ended Input with FIU SLSC Conditioning Board | |
787857-01[1] | OPAL 8935-F, 8 A IN/OUT with FIU SLSC Conditioning Board | |
787858-01 | OP-8940-F Channel Passthrough Board with FIU | |
787766-01 | CCA, RTI-12309 with 8 ix Industrial Connector | |
788251-01[1] | SET-1210 16 CH Resistor Simulator | |
Power Cords | 785708-01 | AC, IEC C19 to NEMA 5-20P, 100 V to 125 V, 2.5 m, US/CA |
785714-04 | AC, IEC C19 to CEE7, 3P, 16 A, 2.5 m, EU | |
785714-06 | AC, IEC C19 to BS1363 2.5 m, UK | |
785714-10 | AC, IEC C19 to GB3, 3P, 16 A, 2.5 m, China | |
786344-01 | AC, IEC C19, Australia, (15 A/250 V), 2.5 m | |
786345-01 | AC, IEC C19, Japan, (15 A, 125 V), 2.5 m | |
786346-01 | AC, IEC C19, India, (15 A, 240 V), 2.5 m | |
786348-01 | AC, IEC C19, Brazil, (16 A, 250 V), 2.5 m | |
786349-01 | AC, IEC C19, Malaysia, Hong Kong, Singapore, Saudi Arabia (16 A, 250 V), 2.5 m | |
786352-01 | AC, IEC C19 to NEMA L6-20P, 2.5 m, US/CA | |
787198-01 | AC, IEC C19, Taiwan, (15 A, 250 V), 2.5 m | |
133084-1R5 | 14 AWG, 250 V, Zlock C14 to Zlock C15, 1.5 m | |
133086-02 | 12 AWG, 250 V, Zlock C20 to Zlock C19, 2.0 m | |
133087-0R6 | 14 AWG, 250 V, Zlock C14 to Zlock C13, 0.6 m | |
133114-1R5 | 17 AWG, Zlock C14 to Open, Ferrule tips | |
System Cables | 132704-0R9[1] | ECUTS, 24 V PS-16 To SLSC |
132705-01 | ECUTS, 48 V, PDU to Switch | |
132844-0R5[1] | Twisted Paris, 16 AWG, 0.5 m | |
134574-02 | SLSC JR1, 16 AWG Twisted Pair, Red/Black, Ring Terminal, 0.25 inch Stud, 2 m | |
134726-1R6 | SHDB44M-4IXBF DIFF, 1.6 m | |
134727-01 | SH68M-4IXBF DIO DIFF, 1 m | |
134728-01 | SH68M-4IXBF AO SE, 1 m | |
134743-1R6 | SHDB44M-8IXBF HPSE, 1.6 m | |
135140-01[1] | SH68M-5IXBF MIO, 1 m | |
135851-0R5 | SHDB9M-IXBF, 0.5 m | |
146503-01[1] | EPO to Thermostat, BYO ATE | |
147315-01[1] | GND, 10-32 Ring to M3 Ring Terminal, 10 AWG, 1 m | |
148312-01 | SHC68-3MDR26-RMIO, 1 m | |
151733-02[1] | CAT-5E Ethernet, Thin Profile, 2 m | |
193128-01 | CAN, No Termination, 9 Pin Female DSUB to 9 Pin Female DSUB, 1 m | |
783701-02 | CCA, XS Selectable HS/ISO-FD/LS CAN External Interface | |
785631-01[1] | GND, 10-32 Ring Terminals, 10 AWG, 1 m | |
785631-02[1] | GND, 10-32 Ring Terminals, 10 AWG, 2 m | |
861173-01 | Display Port to VGA, 7 inch | |
861182-01[1] | Thermocouple, 24 AWG, Type J, Epoxy Coated Tip, 180 inch | |
861195-01[1] | Thermostat to Thermostat, BYO ATE | |
134566-01[1] | PDU Extension Dongle, ECUTS | |
788250-01[1] | OP8810-1 SLSC Cable VHDCI 68 to 2MDR RAO | |
788254-01 | DB9 Splitter | |
ITA Component | 787999-01 | CCA,VPC iCon Receiver Board, 26 ix Industrial Connector, Micro-Power Cutout, EV Signal Level Inverter Tester |
788253-01[2] | Micro Power, Receiver (22 A), 14 AWG, Twisted Pair, Red/Black (30 A) Ring Terminal, 0.25 inch Stud | |
VPC MI Panel | 787998-01[1] | Gas Spring Miniature W/Fittings, 2.56 inch Stroke Lg., 5 lbs. Force |
Panel, Base, Hinged, Mass Interconnect, 19 inch Rack Mount, EV Test | ||
0.16 inch ID Eyelet Mounting Bracket for Gas Spring | ||
Panel, Upper, Hinged, Mass Interconnect, 19 inch Rack Mount, EV Test | ||
Inseparable Assembly, Strain Relief, Mass Interconnect, 19 inch Rack Mount, EV Test | ||
Miscellaneous | 132788-01 | MOXA 16 Port Industrial Unmanaged Ethernet Switch EDS-316-T |
787002-01[1] | Thermostat, Manual Reset, open 80C, B-203S Mounting Hardware, T-147 Terminals | |
788252-01[2] | CONN, Compact Splice, 2 Conductor, 6 mm, 10 AWG, Lever Actuation Type, Transparent | |
134075-01[2] | Bracket, Side, Mount for TRC and MIO, ECUTS-16001 | |
134234-01[2] | Bracket, Rack Mount, Front, PXIe Chassis, ECUTS-16001 | |
784839-01[2] | Spare Caster Set | |
785520-01[2] | Spare Air Filter Panel | |
785521-01[2] | Spare Mounting Rails 24U, Quantity 2 | |
785523-01[2] | Spare Cable Manager, 24U | |
785791-01[2] | Replacement Air Filters, Quantity 5 | |
787261-01[2] | Plate, Rack Mount, Rear, 1U PDU, ATE | |
787431-01[2] | Spare Rear Door Panel 24 U, Gray | |
787440-01[1] | Remote Emergency Power Off Switch, RMX-10060 ESD Gray | |
787441-01 | Kit, Fan, Top, Low Power (540 CFM), 6 x 120 mm Fan, Rack, 19 inch, RMX-10011, ESD Gray | |
787442-01[2] | Panel, Filler, 1U x 19 inch, ESD Gray | |
787443-01[2] | Panel, 3U Filler, RMX-10011, 19 inch Rack, ESD Gray | |
787449-01[2] | Spare Side Panel 24 U, Gray | |
787470-01[2] | Panel, Cable Entry, Brush, 1U, Rack, 19 inch, RMX-10029, ESD Gray | |
787471-01[2] | Assembly, RMX 10040 Power Entry Panel (1-Phase, 16 A), ESD Gray | |
132876-01[2] | Mounting Bracket, Ethernet Switch, ECUTS 24U |