Installing Software on the Host Computer

Before using the cRIO-9081, you must install the following application software and device drivers on the host computer in this order:

  1. LabVIEW 2011 or later
  2. LabVIEW Real-Time Module 2011 or later
  3. LabVIEW FPGA Module 2011 or later[1]
  4. NI CompactRIO Device Drivers 4.0 or later

For minimum software support information, visit ni.com/info and enter the Info Code swsupport.

1 LabVIEW FPGA Module is not required when using Scan Interface mode. To program the user-accessible FPGA on the cRIO-9081, LabVIEW FPGA Module is required.