Deploying Your C Series Module in a Programming Mode in LabVIEW FPGA
- Updated2022-12-13
- 1 minute(s) read
Deploying Your C Series Module in a Programming Mode in LabVIEW FPGA
Complete the following steps to deploy C Series modules in a new programming mode in the LabVIEW project.
- Locate your C Series module in your LabVIEW project. If you just created the project, all C Series modules appear under the FPGA Target, which indicates that they are in the LabVIEW FPGA programming mode.
- Drag your C Series module to Real-Time Scan Resources. This indicates you plan to use your module in Real-Time Scan (IO Variables) programming mode.
-
Right-click the cRIO-904x in the project and select
Deploy All to deploy the module in the Real-Time Scan (IO Variables) programming mode.
Your module is now in Real-Time Scan mode.
- Drag your C Series module to Real-Time Resources. This indicates you plan to use your module in Real-Time (NI-DAQmx) programming mode.
-
Right-click the cRIO-904x in the project and select
Deploy All to deploy the module in the Real-Time (NI-DAQmx) programming mode.
Your module is now in Real-Time (NI-DAQmx) mode.
Programming Examples
For information on getting started with DAQmx programming mode examples in LabVIEW FPGA, go to ni.com/info and enter the Info Code daq2comboExample.