RMC Connector Pinout
- Updated2025-01-22
- 1 minute(s) read
Use the RMC Connector Feature Set Compatibility table to determine if a previously designed RMC is compatible with the new RMC pinout and as guidance on how to design an RMC for compatibility with future generations of the RMC.
| Feature Set | sbRIO-96x7 (Previous Generation) | sbRIO-96xx (CompactRIO Single-Board Controllers with NI-DAQmx) | Future Design Compatibility | |
|---|---|---|---|---|
| DIO[0..63] | Yes | Yes | Yes | |
| DIO[64..95] | Yes | Yes | Not guaranteed | |
| FPGA_CONF | Yes | Yes | Yes | |
| USB_D+/- | Yes | Yes | Yes | |
| RST# | Yes | Yes | Yes | |
| SYS_RST# | Yes | Yes | Yes | |
| 5V | Yes | Yes | Yes | |
| 3.3V | Yes | Yes | Yes | |
| FPGA_VIO[1]1 FPGA_VIO present when the FPGA is programmed. | Yes | Yes | Yes | |
| VBAT | Yes | Yes | Yes | |
| Processor I/O via DIO[0..95]—CAN | Yes | No | Not guaranteed | |
| Processor I/O via DIO[0..95]—RS-232 | Yes | Refer to the model specifications for more information. | Not guaranteed | |
| Processor I/O via DIO[0..95]—RS-485 | Yes | Refer to the model specifications for more information. | Not guaranteed | |
| Processor I/O via DIO[0..95]—SDHC | Yes | No | Not guaranteed | |
| GBE_MDI[0..3+/-] | Yes | No | Not guaranteed | |
| USB_MODE, USB_VBUS | Yes | No | Not guaranteed | |
| USB_CPEN | Yes | Yes | Not guaranteed | |
| Dedicated C Series DIO | Yes | Yes | Not guaranteed | |
| VIN_FILTERED | Yes | Yes | Yes | |
| PCIe | No | Yes | No | |
| SATA | No | Yes | No | |
1 FPGA_VIO present when the FPGA is programmed.