Connecting the sbRIO-96xx to Power

The NI sbRIO-96xx requires a 9 V DC to 30 V DC external power supply. The NI sbRIO-96xx filters and regulates the supplied power and provides power for RMCs.

Note Refer to the device specifications for the power requirements, formulas and examples for calculating power requirements for different configurations and application types, and proper wiring of the power cable assembly.
Caution Do not mate or unmate the power supply connectors while power is applied.

What to Use

  • Screwdriver, 2.54 mm (0.10 in.) flathead
  • Primary power supply, 9 V to 30 V, 55 W minimum

NI recommends the following power supplies for the sbRIO-96xx.

Table 16. NI Power Supplies
Power Supply Part Number
NI PS-15 Industrial Power Supply (24 VDC, 5 A, 100 VAC to 120 VAC/200 VAC to 240 VAC input) 781093-01
NI PS-10 Desktop Power Supply (24 VDC, 5 A, 100 VAC to 120 VAC/200 VAC to 240 VAC input) 782698-01

What to Do

  1. Ensure that your power supply is powered off.
  2. Insert the power connector plug into the power connector receptacle of the NI sbRIO-96xx until the connector latches into place.
  3. Turn on the power supply.