Mounting the Device on a Panel

You can use the NI panel mounting kit to mount the cRIO-9065 on a panel.

What to Use

  • cRIO-9065
  • Screwdriver, Phillips #2
  • NI panel mounting kit, 782863-01
    • Panel mounting plate
    • M4 × 23 screw (x2)

What to Do

Complete the following steps to mount the cRIO-9065 on a panel.


1378

  1. Align the cRIO-9065 and the panel mounting plate.
  2. Fasten the panel mounting plate to the cRIO-9065 using the screwdriver and M4 × 23 screws. NI provides these screws with the panel mounting kit. Tighten the screws to a maximum torque of 1.3 N · m(11.5 lb · in.).
    Note You must use the screws provided with the NI panel mounting kit because they are the correct depth and thread for the panel mounting plate.
  3. Fasten the panel mounting plate to the surface using the screwdriver and screws that are appropriate for the surface. The maximum screw size is M5 or number 10.